Your Xiaomi Redmi Note 12 Pro Plus 5G not Switching ON and you can’t figure out why. We can understand the difficulty this situation can cause. In this article, we will provide some helpful tips and show you what to do when your Xiaomi Redmi Note 12 Pro Plus 5G won’t turn on.
Of course, there are a lot of reasons why the Xiaomi Redmi Note 12 Pro Plus 5G is facing this problem, these problems might be due to hardware or software damage, depending upon which problem is faced by the smartphone, and it is also understandable that the software problems are easy to resolve as compared to those hardware problems. In this guide, we have listed some common reasons that can result in Xiaomi Redmi Note 12 Pro Plus 5G not Switching on issue, and also, we have listed the solutions that might resolve these problems.
Xiaomi Redmi Note 12 Pro Plus 5G Not Switching ON, What are The Reasons?
Before digging into the solutions that will help you resolve the problem, you should understand the underlying causes that will lead to this problem, with the help of these reasons, you can easily understand what is the main issue and you can easily answer the question “Why Your Xiaomi Redmi Note 12 Pro Plus 5G Won’t Turn On”. Below we have listed some possible reasons.
- After the Operating System Updates, there might be some files that are installed with errors, and these errors are not letting the mobile start.
- There might be some virus that is not letting your device boot up.
- When the device is dropped on a hard surface, the display or battery cable becomes disconnected.
- The charging port may be clogged, which could be the cause of your phone not turning on.
- There is something wrong with your phone’s battery or it is not fully charged.
It should be noted that if there is any type of hardware problem, you should probably go to the official service center and get your device repaired rather than attempting the repair by yourself. You might end up making it worse than it is already.
How to Fix Xiaomi Redmi Note 12 Pro Plus 5G Not Switching ON Issue
If Xiaomi Redmi Note 12 Pro Plus 5G is not switching on, there are a number of solutions that you can do in order to fix this issue. You can follow the below methods to switch it on.
Get Out of Sleep Mode
Many brands have developed auto-sleep mode. Once your mobile device turns on the mode, it can fall into the black mode, difficult to switch on. To get out of sleep mode, you have to press the Power Button for at least 10 seconds. It will lead to force start your phone. You can also reboot your smartphone by simultaneously pressing the “volume up” and “power” buttons. To extend sleep time or shut off sleep mode, go to Settings > Display and Brightness. In this menu, you’ll find a Screen timeout or Sleep setting. By tapping this, you can customize the time that your phone sleeps. In most circumstances, this will solve the problem of a phone that won’t switch on.
Charge Your Xiaomi Redmi Note 12 Pro Plus 5G
This may sound silly but it is possible that your phone is just out of battery. You have to check whether your device got a battery or not, if not, charge it. The connecting charger is one of the easiest and simplest ways to resolve this problem. It could be the major reason why your phone is not turning ON. So before doing anything else you should first connect the charger to your phone and check if it switches on or not.
Check Your Charging Cable
If you have connected the charger and you still face the same issue then the next step is to check your charging cable. In several cases, it is found that the charging cable was damaged and that’s why Xiaomi Redmi Note 12 Pro Plus 5G was not able to charge and switch on.
These days, it’s not uncommon to see a charger slide off the port. If the charging cable of Xiaomi Redmi Note 12 Pro Plus 5G is not fitting in its charging port then no charging will take place and hence it will not switch on. After a long period of use, this could happen to original cables. If your charging cable is broken then it will also not be able to charge your mobile and will cause switch-on issues. So, you should always check whether your charging cable is working perfectly or not. If it is not working then you should replace it with a new one.
Check Your Charging Adaptor
If the cable is in good working order, the charging adapter should be checked next. The adapter itself could be the reason for the Xiaomi Redmi Note 12 Pro Plus 5G not turning on issue. Try charging any other mobile with the same charger which you are using to charge Xiaomi Redmi Note 12 Pro Plus 5G and check if the charger is working or not. We also advise you to use only the brand’s original supported adapter.
Verify The Charging Port and Clean It
The charging port on your phone is the next hardware component to double-check. It is best to check the charging port if your phone is not charging at all. After all, the charging port detects the charger and begins the charging process. Verify if it’s working or not. Also, inspect the pins to ensure they are straight and haven’t been curled or broken. Because this will prevent electricity from flowing from the cord to the battery through the port. Also, look inside the port for any debris or dust, as this could cause an issue. Sometimes dust gets stuck in the charging port which can cause charging issues with Xiaomi Redmi Note 12 Pro Plus 5G. So, make sure that your charging port is clean. You can also test the port on your Xiaomi Redmi Note 12 Pro Plus 5G with a different cable to see if it works or not.
Note: Factory reset means the phone will be restored to the factory condition and all your data will be lost. This will erase all of your data and your phone will be reset to default settings like a new phone. So, Make sure you have a backup of your data/important files before applying this method.
Please make a backup of your data on the phone before resetting the device.
To perform this method you have to put your mobile to recovery mode by pressing and holding the power and volume down buttons together. Then a menu will be shown to you in which several options will be displayed. Now you can use the volume buttons to navigate to the menu and the power button to select an option. Simply navigate using the volume button and code to Wipe Data options and press the power button. Now your phone will reset and it will take a few minutes because all the data will be deleted. When your phone restart it will ask you to perform setup and initialization of the device in which it will ask you to sign in to your Google account and choose your language for your mobile phone. So this was the last method that you can use.
Additional Tips to Fix Xiaomi Redmi Note 12 Pro Plus 5G Not Switching ON Issue
Sometimes charging issues might be caused by the phone case that you are using to protect your phone. So, you should remove the case and then try charging your phone. This might help your phone to switch on. Some users also report that their fully charged phones won’t turn on because they dropped it or got it wet. The best thing you can do is, go to an official service center and get your phone repaired by a technician.
So now you know why your Xiaomi Redmi Note 12 Pro Plus 5G is not turning On, there are a lot of reasons behind this problem. We provided all the possible solutions that you can use to switch on Xiaomi Redmi Note 12 Pro Plus 5G. Thank you for visiting our website.